EasyManua.ls Logo

Gardena MaxControl 1834 - Page 27

Gardena MaxControl 1834
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
GBGB
Fault Possible Cause Remedy
Watering program is not Watering program has not v Read off watering program
being undertaken been entered completely. and modify if necessary.
(no watering)
Programs deactivated v Activate program
(Prog. Off). (% Run-Time).
Valve was opened manually v Avoid possible program
previously. overlaps.
Tap turned off. v Turn tap on.
Program overlap v Enter new watering
(first watering start time program without overlaps.
has priority).
Soil moisture or rain sensor v If dry, check setting/
reports sufficient moisture. location of soil moisture/
rain sensor.
Battery almost flat v Insert new (alkaline) battery.
( symbol flashes).
Water Computer does Minimum quantity of water v Connect more drip heads.
not close drawn is less than 20
-
30 l/ h.
A
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA

Related product manuals