Gardena MaxControl 1834 - Connect Water Computer

9
GB
Connect Water Computer:
The Water Computer is fitted with a sleeve nut
K
for taps with
(G 1 " ) (33.3 mm) thread. The adaptor supplied
I
allows the
Water Computer to be connected to taps with a (G
³⁄₄
" ) thread
(26.5 mm).
1. Insert the filter
J
into the sleeve nut
K
and connect the water
computer to the tap.
2. Screw tap connector
L
on to the Water Computer.
I
J
K
L