7
D
Error Error message for the special function
if watering programs overlap.
E
Time Flashes when in input mode for the current data
(hours, minutes, day of the week).
F
Start Flashes when in input mode for watering
start time.
The four display levels
• Level 1: Normal display
• Level 2: Enter the current time and day of the week
• Level 3: Insert watering programs
• Level 4: % Run-Time / Prog. Off
can be selected one after the other by pressing the Menu-key.
You can change display level at any time, even during program-
ming. All the program data which have been confirmed up to
that point with the OK-key are stored.
Display levels
GB
To Next Page
Loading...
