16
GB
8. (a) Select watering cycle with the +-key
(example: 2nd ) and confirm with the OK-key
(2nd/3rd:watering every 2nd day / 3rd day).
The display returns to step 3 and the next highest
program memory setting flashes.
– or –
8. (b) Press
+-key twice and select respective watering days
with the +-key (example: Mo, Fr Monday and
Friday) and confirm with the OK-key. Press +-key until
the below Su disappears.
The display returns to step 3 and the next highest
program memory setting flashes.
V If you would like to water your garden every day, press
the OK-key to confirm each day one after another.
When the program has been created for program memory setting 6,
the display moves to the message % Run-Time / Prog. Off.
You must select the Run-Time percentage you wish to activate
before the watering programs can run.
9. Press Menu-key 3 times (not necessary if the program has
just been compiled for program memory setting 6).
8 (a)
To Next Page
Loading...
