Select the sensitivity of the PIR sensor.
Temperature affects the sensitivity.
The High setting is suitable when the
ambient temperature is warm or you
want to capture distant objects or
capture more, and the Medium/Low
setting is helpful in cold weather.
Note: this option is invalid if Mode is
set as "Time Lapse".
This feature helps you aim the camera
at your target area. Please refer to the
details in Section 10.2.
Set the earliest shot time after Time
Lapse or Hybrid mode is enabled. If
you would like to get photos earlier, it
is recommended to set it later than the
current time.
Interval:
optional
from 3s
to 24h
Set time lapse interval. It takes effect
ONLY when Mode is set as Time
Lapse or Hybrid, the camera will
automatically take photos/videos
according to the set interval, regardless
of whether the PIR sensor has detected
any game. This is helpful when
observing cold-blooded animals like
snakes, or the process of flowering,
etc.
Note: This option is invalid if Mode is
set as "Motion Detection".
To Next Page
Loading...
