Selecting On to set a specific working
time period for your camera in Time
Lapse mode or Hybrid mode. You can
set up to 2 different time periods for
the camera, and it will not capture
time-lapse photos or videos outside of
those periods.
Note: This option is invalid if Mode is
set as "Motion Detection".
Selecting On to enable Wi-Fi, you can
use the app to connect the camera.
Selecting Off to disable Wi-Fi, the
camera will operate in stand-alone
mode and save battery power.
Only change CHX when you feel WiFi
signal is not good or you have multiple
WiFi cameras nearby.
M – Month, D – Day, Y – Year
hh – Hour, mm – Minute
Note: Use "LEFT/RIGHT" key to
switch parameters, use "UP/DOWN"
to set current date and time. Date
input format may change. Please refer
to "Date Format" parameter settings
accordingly.
Select date format which will be
shown on the screen and each capture.
Select time format which will be
shown on the screen and each capture.
12h - AM/PM
To Next Page
Loading...
