Figure 6: Loading the Battery Pack
5.2. Inserting the SD Card
For the E6P Max, you don't need to insert any SD card.
For the E6P, E6PCF and E6PWF models: insert the SD card
(with the camera powered off), before beginning to operate the
camera. Don't insert or remove the SD card when the camera is
powered on or in the surveillance mode (Figure 7).
Figure 7: Inserting the SD Card
The following describes how to insert and remove the SD card:
Insert the SD card into the card slot with its label side
upwards. A "click" sound indicates that the card is installed
To Next Page
Loading...
