and E8PWF models) have been inserted, you can switch on the
camera. When the START button is pressed, the camera will
enter into the SURVEILLANCE mode. If the Mode in the
settings is set as "Motion Detection", the camera will count
down a 30-second delay and then be ready to capture images. If
the Mode is set as "Time Lapse", there will be no 30-second
counting down, and the camera will be ready to enter Time
Lapse.
Once in the SURVEILLANCE mode, no manual controls are
needed or possible (the control keys have no effect). The
camera will take photos or videos automatically (according to
its current parameter settings).
TIP: You can press the START button again to wake up the
camera and reprogram your camera if required.
8. Wi-Fi CONNECTION
8.1. Download GardePro Mobile App
Before using the Wi-Fi functionality, please download the
"GardePro Mobile" app.
NOTES:
The screenshots shown in this section are indicative only. The
actual diagram on different versions of app, iOS and Android
may differ.
During the use of the GardePro app (Referred to as app), please
To Next Page
Loading...
