Select the number of photos taken in
sequence per trigger.
Select video resolution (pixels per
frame). Higher resolution produces
better quality videos, but creates larger
files that take more of the
memory
card
capacity.
10
seconds,
Optional
from
3s to 5m
Select video recording length.
Note: It is highly recommended to set the
night video length to less than 30
seconds as the IR LEDs or the white
flash LEDs will consume more battery
power.
Selecting On will record video with
sound.
MP4 is the mainstream format in the
video industry, more compatible with
any player. Select MOV in case some
legacy digital camera software must be
working with videos in MOV format.
10
seconds,
optional
from 0s to
60m
Select the shortest length of time that the
camera will wait until it responds to any
subsequent triggers from the PIR sensor
after a game is first detected. During the
selected interval, the camera will not
take pictures/videos. This prevents the
memory card from filling up with too
many redundant images. 0 means
capture as fast as possible.
Note: this option is invalid if Mode is set
as "Time Lapse".
To Next Page
Loading...
