Select date format which will be shown
on the screen and each capture.
Select time format which will be shown
on the screen and each capture.
12h - AM/PM
Select On to assign a name, 4-character
long, in the form of Capital A-Z, 0-9 to
record the location in the photos (e.g.
A123 for Yellow Stone Park). This helps
multi-camera users identify the location
when reviewing the photos.
Select On to show date, time,
temperature, moon phase on each
capture.
Selecting On option will cause the oldest
files to be overwritten with new captures
when the memory card reaches its
capacity. With Off option selected, the
camera will stop capturing images once
the memory card reaches capacity.
Select On if you only want the camera to
work within a specified time period
every day. For instance, if the starting
time is set at 18:35 and the ending time
at 8:25, the camera will function from
18:35 the current day to 8:25 the next
day. Outside the time period the camera
will not be triggered.
Note: This option is ONLY valid if Mode
is set as "Motion Detection" .
To Next Page
Loading...
