GARDTEC 800 - User Code Programming and System Configuration; Programming User Codes

Page 14
GARDTEC 800 Series
User Manual
4) Press YES the display will show for example:-
Or:-
5) Press NO to change the status of the Chime,
then press YES, the display will show:-
6) Press 0 to escape, the display will show:-
Chime is Off ok ?
Chime is On ok ?
Do you want to . .
Change Chime ?
01 JAN 18 : 58 : 01
PR5893 8.qxd 22/05/2006 11:14 Page 14