Need help?Do you have a question about the GARDTEC 816 and is the answer not in the manual?
Details the various user code levels and their access permissions.
Steps for correctly unsetting the alarm system using a valid code.
How to set specific parts of the system using Master or Main codes.
Procedure for part setting using Area 1 to 7 codes on compatible models.
How to set specific areas using Master or global Main codes.
How to set specific areas using individual Area codes.
Procedure for testing the full system functionality using Master or Main codes.
Steps to program new user codes and assign their levels and names.
Step-by-step guide for resetting the system after an alarm or fault.
Instructions for setting the system during a short-term power outage.
Programming control codes for system outputs and door entry.
General| Zones | 8 |
|---|---|
| Wired Zones | 8 |
| Wireless Zones | 0 |
| Part Set Suites | 2 |
| Keypad Support | Up to 4 |
| Weight | 1.2 kg |
| Type | Control Panel |
| Power Supply | 12V DC |
| Battery Backup | 12V |
| Outputs | 2 |
| Dimensions | 230mm x 200mm |
To Next Page
