Page 18
GARDTEC
800 Series
User Manual
Programming Time & Date
1) With the display showing:-
2) Enter a Master Code, the display will show:-
(User Names on 816 & 872 Only).
3) Press NO six times, the display will show:-
4) Press YES the display will show:-
5) Press YES for Auto Adjust for British Summer
Time the display will show:-
6) Press NO to change, display will show:-
7) Enter the last two digits of the Year then press
YES. Display will show:-
8) Press YES. Display will show:-
9) Enter the Date in the form dd/mm followed by
YES. Display will show:-
10) Enter the Time using the 24Hr Clock format then
YES. Display will show:-
11) Press 0 to return to Unset.
01 JAN 18 : 58 : 01
Do you want to . .
SET the System ?
Do you want to . .
Set DATE / TIME ?
Summer - Adjust is
On ok ?
Year is 2006
ok ?
Enter Year
20 - - Then YES
Year is 2006
ok ?
Enter Day / Month
- - / - - Then YES
Enter Hrs : Mins
- - : - - Then YES
Do you want to . .
Set Date / Time ?
To Next Page
Loading...
