Page 17
GARDTEC
800 Series
User Manual
13) Referring to the character map enter the required
character (pressing the 3 key will display 'G', pressing
it again will show 'H' and again will show 'I '), once
the correct character is displayed press YES and the
display will move on to the next position.
14) Continue entering characters (up to 9). If
you require a blank space press YES while
the '-' is displayed
15) As you press YES for the ninth character
(or if you have jumped from step 9) the
display will change to:-
16) If you wish to program other User Codes
return to step 4
Or
Press 0 to return to:-
Do you want to . .
Prog. USER CODES ?
01 JAN 18 : 58 : 01
To Next Page
Loading...
