2500 Wall Mount
18
MAINTENANCE
1) General inspection of equipment should be performed when the unit is used to ensure no
catastrophic failures have occurred during the course of use between yearly inspections.
2) It is recommended that yearly inspections be conducted to determine if any bolts, chain
links, or ot her hardware has become worn or loosened. A sample check sheet has been
provided for you in this guide.
3) During yearly inspections, all moving parts should be inspected while in operation. Key
points to look for include rotation points where bushings con tact metal, winches, pulleys
and quick links, and the cable. The cable should be carefully inspected for any fraying or
degradation of the apparent quality of the cable.
4) Any loose bolts or nuts should be tightened.
5) Check sliding components (AAG) for wea r and lubricate as needed.
To Next Page
Loading...
