2500 Wall Mount
2
INTRODUCTION
Thank you for your purchase of a Model 2500 Wall Mounted Backstop . To ensure that
our equipment will provide years of use to you, we are including this installation, operation, and
maintenance guide. This guide will provide information on the proper assembly and installation
methods, operating procedures, and preventative maintenance of your wall mounted backstop .
Please do n ot substitute for factory parts!
Please contact your custom er service representative and allow them to determine if substitute
parts are acceptable.
It is recommended that an individual who has been properly trained perform assembly
and set up of the backstop . No one under the age of 18 should attempt assembly o r set up of the
unit, unless properly supervised.
To prevent normal wear and tear from shortening the life of the unit, preventative
maintenance inspections and repairs should be performed at least once per year. If the units are
subject to high or unusu al usage, inspections should be scheduled to occur more frequently. If
items are found to be nonconforming, replacements can be ordered factory or one of our
authorized dealers. When contacting Gared Sports or Performance Sports Systems , please have
information regarding the dealer/installer who sold the unit, the name of the project, and any
applicable warranty information.
To Next Page
Loading...
