2 nüvi 310/360 Owner’s Manual
GETTING STARTED
Mounting the nüvi on the Windshield
For a tight grip, clean and dry your windshield and the suction cup with a lint-free
cloth before mounting the suction cup.
To mount the suction cup mount:
1. Place the suction cup on the windshield.
2. Flip the lever back, toward the windshield.
3. Open the antenna. Fit the bottom of your nüvi into the cradle.
4. Tilt your nüvi back until it snaps into place. If necessary, rotate the cradle.
5. Plug the small end of the cable into the back of the mount (not the side of the
nüvi); plug the other end into a 12/24-Volt receptacle in your vehicle.
➍
➌
Microphone
jack
➎
➋
➊
Windshield
If you are using the external microphone (optional) for the phone functions, plug the
microphone into the right side of the nüvi cradle.
To remove your nüvi from the cradle, press the small tab on the bottom of the cradle
up, and tilt the nüvi forward.
To Next Page
Loading...
