Garmin ALPHA 10 - Charging the Handheld Device

Charging the Handheld Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.
You should fully charge the battery before you use the device for the first time. Charging a fully depleted battery
takes about 2 hours.
NOTE: The device will not charge when it is outside the charging temperature range (Alpha 10 Handheld Device
Specifications, page 18).
1 Lift the weather cap .
2 Plug the small end of the power cable into the USB port on the device.
3 Plug the other end of the power cable into a power source.
4 After the device is fully charged, unplug the power cable from the device.
4 Getting Started