Editing Locations
1 Select Navigation > Saved Locations.
2 Select a location.
3 Select Details.
4 Select Edit.
5 Select an option.
For example, select Change Elevation to enter a known altitude for the location.
6 Enter the new information, and select .
Deleting a Location
1 Select Navigation > Saved Locations.
2 Select a location.
3 Select Delete Location > .
Courses
You can send a course from your Garmin Connect account to your device. After it is saved to your device, you
can navigate the course on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a
bike friendly commute to work. You can also follow a saved course, trying to match or exceed previously set
performance goals.
Creating a Course on Your Device
Before you can create a course, you must have an activity with GPS data saved to your device.
1 Select > Navigation > Courses > Create New.
2 Select an activity on which to base your course.
3 Enter a name for the course, and select .
The course appears in the list.
4 Select the course, and review the course details.
5 If necessary, select Settings to edit the course details.
For example, you can change the name or color of the course.
6 Select Ride.
Creating a Course from a Recent Ride
You can create a new course from a ride you saved on this Edge device.
1 Select History > Rides.
2 Select a ride.
3 Select > Save Ride as Course.
4 Enter a name for the course, and select .
26 Navigation
To Next Page
