Device Information
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.
NOTE: The device will not charge when outside the approved temperature range (Edge Specifications,
page64).
1 Pull up the weather cap from the USB port .
2 Plug the cable into the charging port on the device.
3 Plug the other end of the cable into a USB charging port.
When you connect the device to a power source, the device turns on.
4 Charge the device completely.
After you charge the device, close the weather cap.
About the Battery
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the product
box for product warnings and other important information.
Device Information 59
To Next Page
