Garmin GNC 255 - Special Tools Required; Table 4-3. Recommended Crimp Tools (or Equivalent)

190-01182-02 GTR 225/GNC 255 TSO Installation Manual
Rev. B Page 4-3
4.5 Special Tools Required
Some of the connectors use crimp contacts. The table below identifies crimp tools required to ensure
consistent, reliable crimp contact connections for the rear D-sub connectors.
Table 4-3. Recommended Crimp Tools (or Equivalent)
NOTE
Insertion/extraction tools from ITT Cannon are all plastic; others are plastic with metal
tip.
Manufacturer
Hand Crimping
Tool
22 – 28 AWG (P1001 – P1005)
Positioner
Insertion/
Extraction Tool
Military P/N M22520/2-01 M22520/2-09
M81969/14-01
M81969/1-04
Positronic 9507-0-0-0 9502-4-0-0 M81969/1-04
ITT Cannon 995-0001-584 995-0001-739
000849490
274-7048-000MIL
AMP 601966-1 601966-6
91067-1
2031838-1
Daniels AFM8 K42
M81969/14-01
M81969/1-04
Astro 615717 615725
M81969/14-01
M81969/1-04