• Bearing to destination (BRG)
• Course to steer (CTS)
• Cross track error (XTK)
• Desired track (DTK)
• Distance to destination (DIS)
• Estimated time of arrival (ETA)
• Estimate time enroute (ETE)
• Ground speed (GS)
• Ground track (TRK)
• Track angle error (TKE)
• Vertical speed required (VSR)
If no flight plan or direct-to destination has been selected, only speed, track and altitude,
may be displayed. All other data types appear as blank lines on the Default NAV Page
until a destination is selected.
To select a different data item for any data field:
1. Starting with the Default NAV Page, press the MENU Key to display the Default
NAV Page Menu.
2. The ‘Change Fields?’ option is already highlighted, so press the ENT Key to
select this option.
3. Use the large right knob to highlight the data field to be changed.
4. Turn the small right knob to select one of the available data items to replace
the one you want to change.
5. Press enter
Restoring Factory Settings
All data fields settings can be quickly returned to original factory settings.
To restore all six data fields to factory default settings:
1. From the Default NAV Page, press the MENU Key to display the Default NAV
Page Menu.
2. Turn the large right knob to highlight the ‘Restore Defaults?’ option.
3. Press the ENT Key.
To Next Page
Loading...
Need help?
General
