Garmin GPSMAP 421 - User Manual

To Next Page

Printing a Mounting Template

NOTICE

These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the

template and an incorrect cutout (too large or too small) on the mounting surface of your boat.

To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and

width measurements are indicated on the template.

The paper size must be larger than the dimensions of the template. Select the paper size using the Properties button in the Adobe Acrobat print

dialog box.

Select Auto-Rotate and Center to ensure the template prints in the correct orientation.

IMPORTANT: When printing the ush mount template, set Page Scaling in the Adobe Acrobat print dialog box to None.

Page Scaling:

Select None:

Auto-Rotate and Center:

Select with a check mark

for correct orientation

Properties: Select

the paper size.

Paper size (example):

Use appropriate size paper.

NOTICE

After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the

correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any

damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.

Other manuals for Garmin GPSMAP 421

Need help?

Do you have a question about the Garmin GPSMAP 421 and is the answer not in the manual?

General

Sport (fitness, running)	No
Marine (chartplotters, sounders)	Yes
Routes quantity	100
Tracks quantity	50
Number of waypoints	3000
Map storage	Internal storage
Map view options	3D
Form factor	Fixed
Display diagonal	4 \
Display resolution	240 x 320 pixels
Display size (HxV) (imperial)	2.4 x 3.2 \
I/O ports	NMEA 0183, 2000