EasyManua.ls Logo

Garmin GPSMAP 400 User Manual

Garmin GPSMAP 400
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GPSMAP 400 series
owner’s manual

Table of Contents

Other manuals for Garmin GPSMAP 400

Question and Answer IconNeed help?

Do you have a question about the Garmin GPSMAP 400 and is the answer not in the manual?

Garmin GPSMAP 400 Specifications

General IconGeneral
Weight1.5 lbs (680 grams)
Waterproof RatingIPX7
Routes100
Track log10, 000 points, 200 saved tracks
Map DataBlueChart g2
ReceiverHigh-sensitivity GPS
Waypoints/favorites/locations3000
Preloaded mapsYes
Waypoints3000
InterfaceNMEA 0183

Summary

Warnings

General Safety Warnings

Potentially hazardous situations and navigation safety advice.

Important Information

Product Information and Disclaimers

Information on map data, California recycling act, and product warnings.

GETTING STARTED

Turning the Unit On or Off

Instructions for powering the device on and off, including initial setup.

Acquiring GPS Satellite Signals

Process for the unit to establish its current location via GPS satellites.

USING CHARTS

Navigation Chart

Displays navigation data like buoys, depth soundings, and marinas.

WHERE TO?

Navigating to a Destination

Searching for and navigating to nearby destinations like fuel, marinas, and waypoints.

Creating and Using Waypoints

Storing and managing up to 1,500 alphanumeric points of interest.

Creating and Using Routes

Planning and storing routes with up to 250 waypoints each.

CONFIGURING THE UNIT

Configuring System Settings

Adjusting general system parameters like language, beeper, and display.

Setting Alarms

Configuring audible alarms for navigation, system, sonar, and weather conditions.

USING SONAR

Setting Up Sonar

Configuring universal sonar settings like color scheme and fish symbols.

INSTALLING THE UNIT

Selecting an Installation Location

Considerations for choosing the optimal mounting spot for the unit.

Mounting the Unit

Instructions for surface or flush mounting the unit using the bracket.

Installing the Transducer

Guides for assembling and mounting the transducer on the boat.

Installing the Wiring Harness

Connecting the unit to the power source and other devices.

Testing the Installation

Procedures for powering on the unit and performing initial configuration and checks.

Related product manuals