Why Garmin nuvi 500 doesn't charge in my car?
Your Garmin GPS might not be charging in your vehicle because the vehicle's power outlet isn't supplying power, or the environment is too hot. Check the fuse in the vehicle power cable. Make sure the vehicle is on and supplying power to the outlet. The device can only charge between 32°F and 104°F (0°C and 40°C). Avoid direct sunlight or hot environments.
Why my Garmin nuvi 500 never gets satellite signals?
If your Garmin GPS never gets satellite signals, move it out of parking garages and away from tall buildings and trees. Remain stationary for several minutes to allow it to acquire a signal.
What to do if my Garmin GPS is frozen?
If your Garmin GPS stops functioning, try turning it off and on again. If that doesn't work, press and hold the power button for 10 seconds. The GPS should then operate normally. Alternatively, you can remove and then reinstall the battery.
How to fix Garmin nuvi 500 that won't connect to computer?
If your computer doesn't sense your Garmin GPS, it might be because the USB cable isn't directly plugged into a USB port, or the GPS is off. Here's what to do: 1. Unplug the USB cable from your computer. 2. Turn the GPS off. 3. Plug the USB cable into a USB port on your computer and into your GPS. The GPS should automatically turn on and enter USB mass storage mode.
What to do if Garmin nuvi 500 battery drains fast?
To maximize the time between charges on your Garmin GPS, turn down the backlight. Go to Tools > Settings > Display > Brightness to adjust it. Also, remove the battery when the GPS is not in use to avoid draining it.
Why Garmin nuvi 500 battery gauge is not accurate?
If your Garmin GPS battery gauge doesn't seem accurate, allow the unit to fully discharge, and then fully charge it without interrupting the charge cycle.
How to fix suction cup on Garmin nuvi 500?
If the suction cup on your Garmin GPS won't stay on the windshield, clean both the suction cup and the windshield with rubbing alcohol. Then, dry them with a clean, dry cloth. After cleaning, mount the suction cup.
General| Display Resolution | 320 x 240 pixels |
|---|---|
| Touchscreen | Yes |
| Battery Life | Up to 8 hours |
| Bluetooth | No |
| Custom POIs | Yes |
| Screen Size | 3.5 inches |
| Water Resistance | Yes |
| Preloaded Maps | Yes |
| Memory | Internal memory |
Install the lithium-ion battery into the nüvi unit.
Connect the nüvi to a power source using the vehicle power cable.
Securely attach the nüvi to your vehicle's windshield or dashboard.
Turn on the nüvi and follow on-screen instructions for initial setup.
Go outdoors to an open area to acquire GPS satellite signals.
Search for destinations by entering street addresses and city information.
Locate points of interest by typing their names using the on-screen keyboard.
Copy and paste files from your computer to the nüvi or microSD card.
Adjust route preferences, avoidances, and other navigation parameters.
Restore the nüvi to normal operation if it stops functioning or freezes.
Download and install the latest software updates for your nüvi.
Resolve issues with the nüvi failing to acquire GPS satellite signals.
Troubleshoot problems with the suction cup mount not adhering properly.
Diagnose and fix issues preventing the nüvi from charging in the car.
Address rapid battery drain or poor battery performance.
Calibrate or resolve issues with the touch screen's responsiveness.
Troubleshoot connection problems when linking the nüvi to a computer.
To Next Page
