58 Rino
®
110 Owner’s Manual
UNIT OPERATION > TRACKS PAGE
To use the TracBack feature:
1. Highlight the Tracback button on the Tracks Page
and press the Thumb Stick In. The Tracback
Menu options (To Beginning and To End) are
displayed.
2. Highlight the desired option and press the Thumb
Stick In to enable.
3. Use the Map Page or the Navigation Page to
navigate the Track.
Setting up the Track Log
You can set the track recording interval to Distance,
Time, or Automatic. You can set the Track display
resolution to High, Medium, Low, and Lowest. You can
also use the Option Menu to delete all saved tracks.
To use Track Log Setup options:
1. Highlight the Tracks Page Option Menu button
at the top of the page and press the Thumb
Stick In to display the menu.
2. Highlight the Tracks Log Setup option and then
press the Thumb Stick In.
You can check the Wrap When Full option by
highlighting it and then pressing the Thumb Stick
In. You can highlight the Record Method and
Interval fields and press the Thumb Stick In to
display their options. Interval options change to
accommodate the Record Method choices.
To Next Page
Loading...
Need help?
General
