90 Rino
®
110 Owner’s Manual
APPENDIX > DATA FIELD DEFINITIONS
Data Field Definitions
The following data field options are available on the Map,
Navigation, Altimeter, and Trip Computer Pages.
Bearing—the direction from your current location to a destination.
Course—the direction from your starting location to a destination.
Current Destination
—the next waypoint on your route.
Current Distance
—the remaining distance to your next waypoint.
Current ETA
—the estimated time of day you will arrive at your
next waypoint.
Current ETE
—the estimated time needed to arrive at the next
waypoint on your route.
Elevation—the altitude (height) above or below sea level.
Final Destination—the last waypoint on your route.
Final Distance—the remaining distance to your final destination.
Final ETA—the estimated time of day you will reach your final
destination.
Final ETE—the estimated time needed to reach your final
destination.
GPS Accuracy
—the estimated accuracy of the GPS signal.
Heading—your moving direction.
Location (lat/lon)—your current GPS position. (Trip Computer
Page Only.)
Location (selected)—the lat/lon of point defined on map. (Trip
Computer Page Only.)
Maximum Speed—the maximum speed the unit has moved.
Moving Avg. Speed
—average speed of the unit while moving.
Odometer—a running tally of distance travelled, based upon the
distance between second-by-second position readings.
Off Course—the distance left or right you are from the original
course (path of travel).
Overall Avg. Speed
—your average speed.
Pointer—indicates the direction to the next destination.
To Next Page
Loading...
Need help?
General
