EasyManuals Logo

Garmin STREETPILOT 2610 User Manual

Garmin STREETPILOT 2610
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Introduction
3
Power/Display Adjustments
Turning the StreetPilot 2610/2650 On and Off
Toggle the power switch on the right side DOWN to turn the unit On and UP to turn Off. The Wel-
come screen appears briefl y, followed by the Card Information/MapSource copyright page, Press IN on the
THUMB STICK or TOUCH ‘OK’ to acknowledge, or wait briefl y until the Safe Driving Warning Message
appears. Once again, press IN on the THUMB STICK or TOUCH ‘OK’ or wait until the Map Page appears.
Adjusting the Backlight, Contrast, and Speaker Volume
The StreetPilot 2610/2650 display and keys can be illuminated for operation at night or in bright sun-
light. Backlight intensity and screen contrast are adjustable. When operating the StreetPilot 2610/2650 at
extreme temperatures, you may fi nd that minor adjustments are needed to obtain the clearest screen.
To adjust screen backlighting and contrast:
1. Press the remote or unit MENU key. Select ‘Display’ (see pages 4-5).
2. Adjust the backlight and the contrast to the desired level (see pages 4-5). To have the unit automatically
adjust the brightness, place a check in the ‘Automatic Brightness’ box. For optimum Automatic Brightness
results, set the brightness to a middle level. If Automatic Brightness is checked, the lower the brightness
slide level is set to, the sooner the unit reaches a minimum brightness level. The unit automatically adjusts
the level depending on ambient light conditions.
To adjust the external speaker volume:
1. Press and hold the SPEAK/VOLUME key. A slider adjustment window appears.
2. Adjust the speaker volume (see pages 4-5). The loudest setting is ten, the softest is one. (Alternatively,
volume can be cycled between three settings by repeatedly pressing SPEAK/VOLUME button from this
screen.) Each press activates the audio number.
To calibrate the touch screen:
1. Press the remote or unit MENU key. Select ‘Display’ (see pages 4-5).
2. Press the remote or unit MENU key again to begin calibration. Follow the on-screen instructions.
Brightness
Slider.
Contrast
Slider.
Speaker Volume
Slider.
2610_2650 OM.indd 3 8/1/2003, 4:15:40 PM

Other manuals for Garmin STREETPILOT 2610

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin STREETPILOT 2610 and is the answer not in the manual?

Garmin STREETPILOT 2610 Specifications

General IconGeneral
AutoYes
Marine (chartplotters, sounders)No
Form factorFixed
Product colorBlack
InterfaceUSB 1.1
Display size (HxV) (imperial)3.3 x 1.7 \
Number of waypoints2000
Weight and Dimensions IconWeight and Dimensions
Depth50 mm
Width143 mm
Height80 mm
Weight420 g

Related product manuals