• Charging station access
Each charging station can be set to "free use"
(default). This enables access for everybody. If the
EV driver identifies before connecting to the EV, the
charging transaction is registered to the EV driver.
At delivery the "free use" is enabled by default. The
charging station is at that time not set up for access
control. Free use can be used, even if the CS has
defined EV drivers, Those rights can be seen as
“overridden” by the free use.
• Invite drivers
The owner can invite EV drivers from the app. Click
Charger Settings
, select
Users
and follow the
instructions in the app. EV drivers can be added
individually or trough an EV driver group.
• Create a charging group for the charging stations
A charging group is used to manage access control
of several charging stations, for example “Visitor
parking area”. Access control can be done both on
individual and on group level. It is not mandatory to
create charging groups during the installation
process. It is possible to create charging groups at a
later time.
48
Installation
To Next Page
Loading...
