Ace 150 • Ace 250
21
LCD cursor located on the Lower Scale, directly
below theTarget ID cursor.
The ELIM function can be used to modify each
Mode’s discrimination pattern. For example, when
an unwanted target is located while hunting, press
the ELIM button to eliminate that Notch (delete
the cursor) to eliminate that specific target. See
illustration below.
All Notch Discrimination modifications made
while in the CUSTOM mode will be retained
when the detector is turned OFF. However, all
changes made to the Notch Discrimination scale
while in the ALL-METAL, JEWELRY, RELICS
To Next Page
Loading...
