EasyManuals Logo

Garrett CSI 250 User Manual

Garrett CSI 250
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Note: For best performance, replace old batteries
with quality alkaline AA batteries. NiMH rechargeable
batteries may be used, but will have a shorter life per
charge. You can expect 20 to 40 hours of operation
depending on battery type.
Access and replace the batteries by gently sliding
the cover off the control housing. Remove batteries
from the CSI 250 when the unit will be stored for
longer than 30 days.
7. Headphone Jack - Headphones with a
1/4” plug can be inserted into the jack found on the
reverse side of the Control Housing. Headphones
13
CSI 250
No audible signal will be produced when a target is
located where a notch is present (those regions of
the Lower Scale where no segments are visible).
5. Depth - The depth of an .38 caliber bullet,
or similar sized target, will be shown on the LCD
screen. Depth is indicated when the LCD scale is
illuminated at 2”, 4” or 6” or 8+ inches. Sweep over
the target with the searchcoil 1” from the soil to get
the most accurate reading.
Note: Targets larger than a .38 caliber shell
cartridge may display shallower than actual depth
while targets smaller than a .38 caliber cartridge may
display deeper than actual depth.
6. Battery Condition Indicator - An LCD
battery graphic is continuously illuminated to indicate
battery level.
12
Garrett Metal Detectors

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garrett CSI 250 and is the answer not in the manual?

Garrett CSI 250 Specifications

General IconGeneral
BrandGarrett
ModelCSI 250
CategoryMetal Detector
LanguageEnglish

Related product manuals