14
Model No. 043-6127-2/043-6128-0/043-6129-8/043-6130-2/043-6131-0/043-5499-2 | Contact us: 1-800-268-6591
Air Conditioner Use
MODE
Operating modes:
1. Press and release MODE until you see the symbol fash for the desired setting.
2. Choose Cool, Dry, Fan Only or Heating.
• Cooling-Cools the room. Press FAN SPEED to select High, Mid or Low. Press the
Plus or Minus button to adjust the temperature.
• Dry-Dries the room. The air conditioner automatically selects the temperature. The
fan runs on Low speed only.
• Fan Only-Only the fan runs. Press FAN SPEED to select High, Mid or Low.
• Heating-Heats the room. Press FAN SPEED to select High, Mid or Low. Press the
NOTE: When the air conditioner is turned on for the frst time after it is plugged
in, it will run in the Smart Mode control. When the air conditioner is turned on at
all other times, it will run according to the previous setting. Smart Mode can be
selected with the remote.
Only if the unit is operated in Extremely HUMID air, water will be collected in the
container inside the unit. If the water container is full, the air conditioner will stop.
The screen will displays “E5” to inform you to empty the internal container.
NOTE: Dry mode should not be used to cool the room.
COOL
FAN
NOTE: Auto fan speed cannot be selected in Fan Only mode.
DRY
MODE
To Next Page
Loading...
Need help?
General
