24
Model No. 043-6127-2/043-6128-0/043-6129-8/043-6130-2/043-6131-0/043-5499-2 | Contact us: 1-800-268-6591
Air Conditioner Use
SLEEP MODE
SLEEP mode can be set in Cooling, Heating or Dry operation mode. This function gives you
a more comfortable environment for sleep.
1. Press MODE to select Cooling, Heating or Dry.
2. Press the UP or DOWN arrow button to set the temperature.
3. Press SLEEP. After 5 seconds, the lights on the control panel display will dim.
4. To turn off Sleep control, press SLEEP, MODE, POWER or wait 8 hours for Sleep control
to turn off automatically.
CLOCK FUNCTION
1. You can or adjust the real time by pressing CLOCK button.
2. Use the Plus and Minus buttons to set the correct time.
SLEEP
CLOCK
NOTE:
• The appliance will stop operation automatically after operating for
8 hours.
• Fan speed is automatically set at low speed.
• In the Cooling mode, if the current room temperature is below 79° F
(26°C), the temperature will automatically increase 2°F (1°C) during the
frst hour after Sleep control is activated, then remain the same.
• In Heating mode, set temperature will decrease by 5°F (3°C) at most for
3 hours then keep steady.
NOTE:
• Sleep control cannot be selected when Fan Only is selected.
• The mode, temperature and airfow direction may be adjusted during
Sleep control. The fan speed is automatically set to Low speed. After
5 seconds, the lights on the control panel display will dim again.
• The air conditioner will return to previous settings after Sleep control is
turned off.
To Next Page
Loading...
Need help?
General
