TUNING THE ENGINE 16
103
102246-10
–
Remove guide plate
4
from handle tube
5
.
– Position the required guide plate on the grip tube.
Guideline
The label OUTSIDE must be visible. Marking
A
must be posi-
tioned at marking
B
.
Black guide plate (79002014100)
Alternative 1
Grey guide plate (79002014000)
Info
The gray guide plate opens the throttle valve more slowly.
The black guide plate opens the throttle valve more quickly.
The black guide plate is already mounted when the vehicle is
delivered.
A00850-10
– Clean the outside of the handlebar and the inside of the grip tube.
Mount the grip tube on the handlebar.
– Attach the throttle cables to the guide plate and route correctly.
–
Position half-shells
3
, mount and tighten screws
2
.
Guideline
Screw, throttle grip M6 5 Nm (3.7 lbf ft)
–
Slide on sleeve
1
and check the throttle grip for ease of move-
ment.
Finishing work
–
Check the play in the throttle cable. ( p. 101)
16.4 Adjusting the idle speed
Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
– Set the idle speed to the specified value. (Your authorized GASGAS Motorcycles workshop will be glad to help.)
To Next Page
Loading...
Need help?
General
