PREPARING FOR USE 7
23
7.7 Preparing vehicle for high temperatures or slow riding
–
Make sure that no radiator covers ( p. 85) are installed.
V00814-01
– Check the radiator cap.
Value on the radiator cap 1.8 bar (26 psi)
» If the indicated value does not correspond to the setpoint value:
Warning
Danger of scalding During motorcycle operation,
the coolant gets very hot and is under pressure.
– Do not open the radiator, the radiator hoses or
other cooling system components if the engine
or the cooling system are at operating temper-
ature.
– Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
– In the event of scalding, rinse the area affected
immediately with lukewarm water.
– Change the radiator cap.
600868-01
–
Adjust the secondary drive to the road conditions.
Info
The engine oil heats up quickly when the clutch is operated
frequently due to an excessively high secondary ratio.
– Clean the radiator fins.
– Straighten the bent radiator fins carefully.
–
Check the coolant level. ( p. 88)
7.8 Preparing the vehicle for low temperatures or snow
M01107-01
– Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from your
authorized GASGAS Motorcycles workshop.
To Next Page
Loading...
Need help?
General
