1716
INSTALLATION STEPS
STEP 1
Attach the front skirting board
STEP 3
Insert the spacer plugs
STEP 2
Secure the front skirting board using the screws provided.
The front skirting board may not be pre-installed
on the BBQ. This to avoid damage in transit. Follow
below steps to install the front skirting board.
IMPORTANT
Remove all packing and transit protection before
assembly.
CAUTION: Ensure no packing material is left in
BBQ before lighting.
SERVICING INSTRUCTIONS
Appliances should be serviced at least annually and servicing must only be carried out by a Licensed
Plumber or Authorised Person.
Clean the Burner Ports and top with a Soft Brush. Inspect and clean all combustion air inlets, then replace
the Burner ensuring it is rmly secured.
To Next Page
Loading...
