Gate NanoHARD User Manual

12
WWW.GATEE.EU
USER GUIDE
Step 7. Save and go to ACTIVE BRAKE settings.
Click & HOLD!
Step 6. Set battery protection function. Count the number of flashes.
FLASHES
1 flash
2 flashes
3 flashes
4 flashes
BATTERY PROTECTION
SETTINGS
LiPoly 7.4V
LiPoly 11.1V
LiPoly 14.8V
OFF
SHORT CLICK
Step 8. Set ACTIVE BRAKE mode. Count the number of LONG and SHORT flashes.
FLASHES
ACTIVE BRAKE
SETTINGS
ON
OFF
1 long flash
1 short flash
1 long flash
2 short flashes
SHORT CLICK
Step 9. Save and exit.
Click & HOLD!

Gate NanoHARD Specifications

General

Brand	Gate
Model	NanoHARD
Category	Controller
Language	English