Gate NanoHARD - 04. How to Read Diagnostic Trouble Codes (DTC); Enter Diagnostic Mode

Step 4. When is ON, NanoHARD. blue LED disconnect JUMPER from
uC
Blue LED
ON
BATTERY
UP TO 14.8V
Step 3. Connect BATTERY to NanoHARD.
BATTERY
UP TO 14.8V
uC
Blue LED
starts blinking
13
WWW.GATEE.EU
USER GUIDE
04. How to read Diagnostic Trouble Codes (DTC)
Step 1. Disconnect BATTERY and MOTOR from NanoHARD.
Step 2. Connect JUMPER to NanoHARD.
uC
FUSE
FUSE
BATTERY
UP TO 14.8V
AEG Motor
FUSE