GATEXPERT SW200DC - Page 30

Instructions for SW200DC
www.gatexpertstore.com
28

3. Increase deceleration distance
appropriately
Door 2 Obstructed in
opening
1. Check whether there are
obstacles when opening door 2
2. Adjust resistance sensitivity
appropriately
3. Increase deceleration distance
appropriately

Door 2 is closing with
difficulty

1. Check whether there are
obstacles when door 1 is closed
2. Adjust resistance sensitivity
appropriately
3. Increase deceleration distance
appropriately
Door 2 is closing with
difficulty
1. Check whether there are
obstacles when door 2 is closed
2. Adjust resistance sensitivity
appropriately
3. Increase deceleration distance
appropriately
Infrared disconnect
1. Check the infrared setting status
2. Whether there are occlusions in
the infrared
Door 1 closes before door
2
1. Relearn your itinerary
2.Adjust the opening time interval
The motor works for too
long
1. Check whether you have
completed the itinerary
2.Hall component damage
No study itinerary
Re-complete the trip