GATEXPERT SW200DC - Installation Drawing; Tools Needed for Standard Installation

Instructions for SW200DC
www.gatexpertstore.com
4
4. Installation Drawing
Figure 1
SW200DC swing gate opener is applicable to single leaf gate weight less than 200kg, and
the length shorter than 2m. The drive mode adopts planetary transmission to combine
with the screw rod transmission. This gate opener must be installed inside the
enclosure or yard for protection.
5. Tools Needed for Standard Installation
No.6 Allen
Wrench
Spirit Level
Slotted
Screwdriver
Tape
Phillips
Screwdriver
Adjustable
Wrench X 2
Hatching Pen
Note: the cables must be suitable for outdoor use.