GE Security 1200C User Manual

1200C-2000C Fire Alarm Control Panel and Repeater User Manual 17
Product compliance
All 1200C-2000C control panels are designed to comply with the requirements of
European standards EN 54-2 for control and indicating equipment, and EN 54-4 for
power supply equipment).
EN 54-2 compliance for control panels with the SD2000 module
Control panels with the SD2000 module installed have the following options with
requirements according to EN 54-2:
Table 10: EN 54-2 options with requirements with the SD2000 module
Clause Description
7.8 Output to fire alarm devices
7.9 Output to fire routing equipment
7.10 Output to fire protection equipment
7.11 Delay to output
7.12 Dependency on more than one alarm signal
7.13 Alarm counter
8.4 Total loss of the power supply
9.5 Disablement of addressable points
10 Test
EN 54-2 compliance for control panels with the VDS2000 module
Control panels with the VDS2000 module installed have the following options with
requirements according to EN 54-2:
Table 11: EN 54-2 options with requirements with the VDS2000 module
Clause Description
7.8 Output to fire alarm devices
7.9 Output to fire routing equipment (+ VDE0833)
7.10 Output to fire protection equipment (+ VdS requirements)
7.11 Delay to output
7.12 Dependency on more than one alarm signal (+ VDE0833)
7.13 Alarm counter
8.4 Total loss of the power supply
8.9 Output to fault routing equipment
9.5 Disablement of addressable points
10 Test

GE Security 1200C Specifications

General

Brand	GE Security
Model	1200C
Category	Control Panel
Language	English