GE 28821FE1 - Answerer; Set Alarm Clock

5
6. The receiving handset will turn on the microphone and the originating handset
will turn on the speakerphone to monitor sound from the receiving handset.












In the Answerer Menu, there are two programmable submenus: Set Alarm Clock and
Handset Setup.
1. Make sure your phone is  (not in TALK mode).
. Press the mute/menu OK button to go to the main menu.
. Press CALLER ID-VOLUME (5 or 6) button to scroll to ANSWERER.
. Press mute/menu OK button to enter the submenu.

1. Make sure your phone is  (not in TALK mode).
. Press the mute/menu OK button to go to the main menu.
. Press CALLER ID-VOLUME ( 6 or 5) button to scroll to ALARM.
. Press mute/menu OK button to enter the submenu, ALARM 1ON 2OFF shows on
the display.
5. Use the touch-tone pad to enter the selection, or use the CALLER ID-VOLUME
( 6 or 5) button to scroll to  or .
6. If you select , press the mute/menu OK button to conrm and advance Set
Alarm Time sub-menu.
7. Use the number keys to enter the time, then use number key  to select  and
number key 7 to select .