GE 28821FE1 - Global De-registration


. Use the touch-tone pad to select 1 for  or  for . Or use the
CALLER ID-VOLUME ( 6 or 5) button to scroll to 1YES or 2NO.




. Select 2NO, if you do not want to de-register.
5. If you select 1YES, press the mute/menu OK button and MOVE NEAR TO BASE
displays for  seconds, then CONFIRM? 1YES 2NO appears in the display.
6. Press the touch-tone pad to select 1YES or 2NO, or use the CALLER ID-VOLUME
( 6 or 5) button to scroll to 1YES or 2NO.
7. If you select YES, press the mute/menu OK button to conrm. DE-REGISTER...
shows in the display. You will hear a conrmation tone. Then HANDSET X
DEREGISTERED shows in the display to conrm the handset is deregistered.
HANDSET
NEEDS REGISTRATION


If one or more handsets becomes lost, you should de-register all handsets to ensure
proper system operation.




1. Disconnect power from the base by pulling the plug out of the back of the unit.
. Press and hold the nd button and while holding the nd button reconnect the
power.
. Continue to hold the nd button until the charge/in use voicemail light ashes
rapidly.
. Release the nd button.
5. Press and release the nd button on the base once. All handsets are de-registered
and HANDSET NEEDS REGISTRATION shows in the display.