GE 28821FE1 - Registration; De-Registration


. Press the mute/menu OK button to conrm. You will hear a conrmation tone and
your selection shows in the display.

Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.

1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the REGISTRATION
sub-menu.
. Press the mute/menu OK button to enter the menu. REGISTRATION 1YES42NO
shows in the display. The default setting is 2NO.
. Use the touch-tone pad to select 1 for  or  for . Or use the
CALLER ID-VOLUME ( 6 or 5) button to scroll to 1YES or 2NO.
. If you select 1YES, press the mute/menu OK button. HOLD BASE PAGE FOR 5
SECONDS, THEN PRESS HANDSET PROGRAM shows in the display. (Your handset
should be held near the base during registration process.)
5. Press and hold the nd button on the base unit, the charge/in use voicemail
indicator ashes. Press the handset mute/menu OK button. REGISTERING shows
in the display. HANDSET X REGISTERED shows in the handset display, where X is
the handset number. You may now rename your handset. (Refer to Step  &  of
Handset Name Section)




De-registration cancels registration. During the de-registration process, keep the
handset near the base.

1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the DEREGISTRATION
sub-menu.
. Press the mute/menu OK button to enter the menu. DEREGISTRATION 1YES42NO
shows in the display The default setting is "2NO".