GE 28821FE1 - Dialing a Number from Internal Memory; Ignore The Incoming Call; Answering System Operation; Message Counter Indicator

8

1. Make sure the phone is  (not in TALK mode).
. Press the mute/menu OK button to go to the main menu.
. Press CALLER ID-VOLUME ( 6 or 5) button to scroll to PHONEBOOK.
. Press mute/menu OK button to enter  menu.
5. Use the CALLER ID-VOLUME ( 6 or 5) button to scroll to VIEW RECORDS.
6. Press the mute/menu OK button to conrm.
7. Use the CALLER ID-VOLUME ( 6 or 5) button or key in alphabet to move to the
desired number.
8. Press the TALK or SPEAKER buttons, the number dials automatically.

With this feature, you can transfer all the incoming calls to the answering system.
When the phone rings, press the END/cancel button on the handset. The answering
system will answer the call for you.

This section discusses the buttons and features on the answering system.

The message counter gives you a numeric display of how many messages you have.
The new message indicator ashes to indicate you have new messages. See below
for the details.
a) Message counter has a number displayed without ashing - No new messages.
Shows total number of old messages.
b) Message counter has a ashing number displayed - There are new messages.
Shows total number of old and new messages.
c) Message counter has bars ( - - ) - Answerer is off.
d) Message counter has an “F“ ashing on the display - Memory is full.
e) Message counter has a “CL” ashing on the display - Clock is not set since power
up or after power failure.
f) Message counter has six horizontal bars ashing on the display - MEMO
recording.