GE 29460 - Separate Line Jack Setup; Single Line Jack Setup

10
Each Line on a Separate Modular Jack
If you have two separate phone jacks,
each with its own line, connect one of
the phone cords to the LINE 2 jack, and
connect the remaining phone cord to the
LINE 1+2 phone jack located on the back
of the phone.
NOTE: Connect the phone cord from
the LINE 1+2 jack to the outlet that you
want to be line 1.
NOTE: Two-line capability requires two-
line service from your local telephone
company.
A Single Line on a Modular Jack
If you want to only connect one line,
plug one of the telephone line cords into
the LINE 1+2 jack and into a single
modular phone jack. Your phone will
only use line 1 with this connection. Line
2 will not be used.
Line 2
Line 1