GE 940 - Connect the Reader to the Micro

Connect the reader to the micro 13
Connect the reader to the micro
The Model 940 Reader is supplied with a convenient removable
9-pin connector as shown in
Figure 5 below.
Refer to the following sections for more information on
connecting the reader:
•“Pinouts” on page14
• “Wiring diagrams” on page 15
• “CE/FCC compliance” on page 25
Figure 5. Model 940 Reader
WARNING: It is important to ensure all connections are made
prior to applying power.
Removable 9-pin connector
Pin 1