Regulatory approvals 27
Figure 11. Proprietary burglar alarm unit accessory configuration
1
Model 940 Reader: See Figure 6, Supervised F/2F wiring diagram on
page 16 for wiring the Model 940 to the Micro/5.
2
Micro/5: See the Micro/5 Installation Manual and the NX-8E Control
Panel Installation and Startup Manual for wiring the Micro/5 to the
NX-8E keypad.
3
NX-8E panel: Connect to the OH2000E Receiver using a dial-up
connection.
Note: The NX-8E keypad must be installed adjacent to the Model 940
reader in order to be UL compliant.
4
OH2000E Receiver: Connect to the Picture Perfect server, using a serial
line RS-232 connection.
Note: The OH2000 E receiver must be installed adjacent to the
Picture Perfect host in order to be UL compliant.
5
Picture Perfect Server running one or more instances of the oh_receiver
interface.
To Next Page
Loading...
