GE AMX-II User Manual

GENERAL ELECTRIC MEDICAL SYSTEMS AMX-II X-RAY UNIT
10-377 SM A0654E
e. Retighten the two light housing mounting
screws and replace the namepiate and con-
trol knobs.
+. | Repeat the alignment check from Step 1.
10. If the indicated versus actual field size does not
fail within specifications, adjust the appropriate
pointer or pointers as follows:
a. Remove the Blade Control Knobs and the
nameplate. Refer to Section 14-1.
b. Gently bend the pointer sideways to make
the necessary adjustment.
c. Replace the nameplate and the knobs.
d. Repeat the alignment check from Step 1.
LIGHT
11. Record collimator Beam Alignment on F-3382, CREWS
Sec. 7 Test SET-F. o —
=?
m
3
22009-P10
411-39

GE AMX-II Specifications

General

Brand	GE
Model	AMX-II
Category	Medical Equipment
Language	English