GE AMX-II

GENERAL ELECTRIC MEDICAL SYSTEMS AMX-il X-RAY UNIT
1-981 OM A0654E
TUBE HOUSING COOLING CURVE ANODE COOLING CURVE
1 300 120
a
vr
ART
“A ME 110 we
1 100 T
wo o
1 000 \
900
a
=
z
3 io
上 ©
< -=
I o
2 >
2
©
800
<
80
22" À 3
E о 700 a 7
πι \ >
za
600
x
8 z \ 2
< £ 500 Å =
æt z
5 * \ 3
= 400
n> \ Е
м \ <
2 — 30 主
の N a
3 200 MN z
< X $
100 2
©
T
0 F
9 50 109 150 200 250 300 350 400 450
TIME IN MINUTES 186 14-010 10
Collimator Specifications | 0
P 0 1 2 3 4 5 6 7 в
Maximum rating is 150 KVP. FIME IN MINUTES — 4179-010
Minimum inherent filtration of the collimator is 1.5mm aluminum equivalent at 150 KVP. Additional fil-
tration may be obtained by inserting the 1mm and/or 2mm aluminum filters.
Minimum source-to-skin distance is limited to more than 30 centimeters by the tracks on the bottom of the
collimator for mounting the accessory Extension Cylinder.
Full 17” x 17” (.43 m x .43 m) radiographic coverage at a 40"' (1.02 m) source-to-image distance (SID)
is provided for tubes with a 15 degree target angle as specified on page 1.
A high intensity GE Quartzline® Lamp with provision for long life is used for field illumination. Distinct
shadow crosshairs indicate the field center. A Bucky centering light patterm is provided to aid in longitudi-
nal focal spot-Bucky alignment.
The collimator can be rotated and locked positively at 0°, +/-15°, +/-30°, +/-45°, and +/-90° from the
front position.
DIAGNOSTIC SOURCE ASSEMBLY MINIMUM INHERANT FILTRATION
COMPONENT MM/S AL. EQUIV. KVP MEASURED
Tube Insert 0.7 130 KVP
Tube Housing 0.3 130 KVP
Collimator 1.5 150 KVP
Additional Collimator Filters 1.0 一
2.0 一
16